BigBoi WashR PRO MKII Pressure Washer Complete Kit

The Mean & Green Pressure Washer PRO

BigBoi understand that there is a perfect combination to deliver the perfect wash, so they have fine-tuned the desired PSI and water flow rate to suit the best professional detailers. From the pump head to motor, combined with the hose kit, right down to the nozzle orifice, introducing the completed detailers pressure washing dream, the BigBoi WashR PRO.

The BigBoi WashR PRO's cutting edge Total Stop System (TSS) and will sense water flow in the pump, automatically turning off when the trigger is released, reducing the noise and extending the life of the motor.

Brushless Induction Technology gives you 4 times the life span of your conventional pressure washer. Plus a commercial heavy-duty European designed Triplex forged brass pump head, the WashR PRO 4 Pole set up delivers low 1450RPM with high torque and all for a whisper at 80DB.

Max rating of 1850PSI (130BAR) and a flow rate of 9.5 L/M (570 L/H), the BigBoi WashR PRO MKII has been tuned for detailing to give 9.2L/M (552 L/H) and 1450PSI at the nozzle where it counts

Specification

• 2000W (Peak) Induction
• Nozzle Pressure: 1400PSI
• Max Flow Rate: 9.2LPM max
• Total Stop System (TSS)
• Brushless 4 Pole Induction Motor
• Hose Length: 13m
• Hose Connection : 3/4" Quick Connect
• Nozzle Connection: 1/4" Quick Connect
• Max Water Temp: Can accept up to 60 C
• Less than 80 dB
• Power Cable Length: 5m
• Power Plug: Type G UK 3 Pin
• Voltage: 240V/50HZ
• Dimension (L x W x H): 53x 28x 33cm
• Weight: 28kg
• 1 Year Trade / 2 Year Domestic Manufacturing Warranty
• 10 Year Pump Head Warranty

What's Included:

• 1x BigBoi Pressure WashR PRO MKII
• 1x Foam cannon (Orifice size 1.15)
• 1x Short trigger gun
• 1x Stainless extension Wand
• 1x 13m Commercial grade braided hose
• 4 x Quick release nozzles (Orifice size 4.0mm)
• 1 x Brass Water inlet connection
• 1 x Brass 3/8" quick release Hose connector M22/14MM
• 1x Larger black breather cap (Replace with red shipping version)
• 1x User Manual

Documents

Set Up Exchange the red shipping cap with the larger black breather cap supplied, to avoid over heating and low pressure.

Compatible with Generators This pressure washer can be used with a generator. We recommend a generator with a minimum output of 5000 watts (5 kW) to ensure reliable performance. Pressure washers often require a higher starting wattage due to initial power surges, so it's important your generator can handle that. If you plan to run multiple devices at once, make sure to add up the total wattage to avoid overloading. A 5000W generator offers a good balance of power and portability—ideal for mobile detailing setups.