NEW IN from SAM'S DETAILING

Keep it simple.

That’s the mantra that Sam’s Detailing lives by; and who are we to disagree.

Born in the heart of Northern England the guys and girls at Sam’s Detailing have one goal: Making top quality car detailing products for affordable prices and of course, keeping it simple.

Cutting out all the rubbish and getting straight to the point, we love it.

We have a couple of new products from these guys here at My Car Cleaning and we’ll have a quick peek at them.

First up,

Sam’s Detailing Clay Lubricant

Clay Lubricant can be used with any clay media to give your paintwork that factory smooth finish with hints of coconut.

How to apply

Remember to always test the product on an inconspicuous area first.
Spray Clay Lubricant over the panel and work the clay media back and forth using light pressure.
You will notice the clay bar or mitt getting easier to glide over the paintwork as you go back and forth. Ensure you continuously lubricate the panel as you rub back and forth.

Sam’s Detailing Rubber & Trim Dressing

A water based dressing that will give your plastics and rubber a deep matt finish with a cherry scent.

How to apply

Remember to always test the product on an inconspicuous area first. Prep the section with Sam's Tyre Dressing Stripper thoroughly.
Apply about 3 pea-sized drops to one of our applicators.
Work the product into the trim thoroughly and buff off with a microfibre to give a deep matt finish.

Sam’s Detailing Clay Bar Set

Clay Lubricant's best friend. Designed to pick up the most minor contaminants. It will leave your paintwork feeling super slick.

How to apply

Remove all outer packaging and drop into warm water for 3-4 minutes.
Break off half of the bar and form it into a disc shape that is about the width of your four fingers.
Liberally spray Clay Lubricant over the panel and gently work the clay bar back and forth. If you don't have Clay Lubricant, you can also use Exterior Detailer or Shampoo.

Sam’s Detailing 3 in 1 Polish

A 3 steps in one polish that will remove light oxidation, fill in minor imperfections and leave some protection down all in one go! Can also be used on lacquered plastic trim.

How to apply

Remember to always test the product on an inconspicuous area first. Ensure the surface is completely clean and free of any contaminants.
Using Sam's Wax Applicator, apply 2 pea-sized drops of the product onto the pad and work into the paintwork in straight lines until it begins to go see through.
Buff off the residue immediately. Do not allow the product to dry onto the paintwork.